FLOOD LIGHT MSL VFL T6

FLOOD LIGHT MSL VFL T6

Download Specsheet

Key Features
Solar panel high efficiency monocrystalline silicon with 25 years lifetime
LED, lifespan more than 50,000 hrs
Equipped with the highest lighting efficiency LED chip up to200 LM/W max
Equipped with stain less steel ON/OFF button
Lithium Battery high-capacity lithium battery, intelligent charging to prolong battery's service life
MPPT Controller Independently developed intelligent MPPT controller with 95% charging efficiency
exclusive private mold, Self-designed and Independent research and development
Die-cast aluminum framework and elegant look
Compact and portable, easy to install
Light control, time control and the microwave sensor function

Technical Specifications
Led power  13W
Luminous flux 2,480LM
Fixture dimension 375*275*56MM
14.76”*10.82”*2.20”
Solar panel  35W/10V
Lithium battery 6.4V 115WH
Fixture color Black
Color temperature 6000K
Housing material Aluminum die casting
Motion Sensor Motion sensor detected
Operation profile 4H/ 6H/ 12H Depend on solar radiation
Remote control 2.4G radio remote
Charging time 4.5 hours
Discharging time >15 hours
Working temp.-15C ~ +70C / 5F ~158F
Connect cable 4.5 m / 14.7’
IP rate IP65
Certificates CE ROHS, CB



 Applications Guide
 Villas
 Hotels
 Resident communities
 Gardens
 Temporary Tent Lighting
 Kiosks
 Bus Stations

Installation Manual
Before Installation We recommend you always try to install this solar floodlight a place where the solar panel is exposed to direct sunlight in order to achieve maximum performance
The working time of the solar floodlight is directly related to the solar panel's exposure to sunlight
The performance will be affected by weather and season
Under manual mode, this light can also work in the day time when the solar panel is charging the light
This function is designed to provide lighting to the places where there is never daylight, like warehouses , winecaves etc
Please do not forget to clear the solar panel after a while when it gets dirty

Remote control
The remote control is used to adjust the lighting power and time as you require, in
summer time or your local sunshine is great all the year-round, then you can use
with 75% or 100% power, otherwise, you can use 50% even 25% power to save
energy of battery, Also you can set the working time which can be last 4 hours, 6 hours 12 hours, etc
Meanwhile, the motion detection functions are available which you can use it as asecurity light
Function 1is light will be off and only turn on with100%power and last 1min when it detects movement, function 2is light work with 100% power when there is detection from working with 30% power when no detection
Different from PIR remote, this is a 2.4G remote is more sensititve and no need to point at the light when you use it , the distance from remote to light can be up to 10 m/32.80’inopen-airarea



 Common troubleshot


Remark
1. Brightness level of the floodlight must be set before choosing operational times
(4h,6h or 12 hours)
2. Motion sensor option is unavailable when setting a specific lighting output
(25%, 50%,75% or 100%)
3.The two motion sensor modes are factory set and cannot be changed
Light will only turn on with100% output or change from30% to 100% out put when move mentis detected by microwave sensor
Only the working time can be adjusted
4. The light will